Speaker Positioning for Home Theater systems.

Mar 23, 15 Speaker Positioning for Home Theater systems.

5.1, 7.1 and other surround sound setups

The guidelines below will be able to assist you to get amazing surround sound in rooms including those
with less-perfect layouts.

Do your best not to get too hung up on locating the precise place that is ideal for every loudspeaker.
Remember that most newer receivers have automatic speaker calibration, making it simple to compensate for loudspeaker positioning that is imperfect.

Centre channel loudspeaker

Position your middle loudspeaker directly or below your television set and lines it up with the midpoint of your Television screen. In case your center loudspeaker is set higher or substantially lower in relation to the tweeters in your right and left loudspeakers, lean it down or up to point the sound toward your listening location.

Front left and right loudspeakers

Ideally, a small arc will be formed by your front loudspeakers toward the middle of your primary seating area by means of point and your center channel loudspeaker. To form an ideal arc, make use of a measuring tape to ensure that your front and center channel speakers are precisely the same distance from your listening location. In case your interior decorator insists the front loudspeakers sit flush against the wall, do not stress. It’s possible for you to compensate for the shortage of an ideal arc when the system is calibrated by you.

Home Theater System Setup

Surround speakers

Your surround loudspeakers are supposed to envelop you in a cloud of special effects and atmospheric sound, which should make you feel like you are really at the center of the action unfolding in your TV.

 

 

 

In a 7.1channel system you can set surround loudspeakers beside and behind your seating area. With a few receivers, you may use the two additional channels up front instead, for “height” or “width” channels that offer you a larger front soundstage. In case your receiver has even more channels accessible, you can enlarge to a 9.1- or an 11.1-channel surround system.

Get room-friendly strategies for running cable to your surrounds in our post on connecting home theater loudspeakers.

Dolby Atmos® loudspeakers

Dolby Atmos was made to produce a layer of audio over the listener. A Dolby Atmos home theater begins with a standard 5.1 or 7.1 surround sound loudspeaker set up. Following that, you add a couple of loudspeakers to project audio from over the listening position.There are just two methods to do this.

In ceiling loudspeakers

This strategy is an excellent alternative when you’re need the perfect listening experience or designing a brand new home theater. Use four in ceiling loudspeakers, in case you are able to, for maximum effect. Dolby recommends finding one pair before another pair behind your listening position as well as it. In addition they propose using in ceiling loudspeakers with a broad dispersion pattern, or speakers with aimable drivers which may be angled somewhat toward your listening location.

In case your system can only accommodate one pair of loudspeakers that are in ceiling, mount them somewhat in front of where you will be listening.

Do not stress if your loudspeaker placement is not perfect, your Atmos-empowered receiver’s auto calibration system will help dial in the sound.

Loudspeakers enabled by Dolby Atmos

Dolby Atmos enabled loudspeakers offer a simple solution. These specially constructed versions use up-firing drivers to give sound effects that are overhead. It is also possible to join Dolby Atmos-enabled loudspeakers with ceiling-mounted loudspeakers. This is helpful if, for example, you’ve got two loudspeakers already set up on your ceiling but would like to add two more speakers that could produce sound that is overhead.

Offered in various sizes and shapes, they are able to rest on stands, take the type of modules that sit on the very top of your front and back loudspeakers, or are incorporated into one cupboard with front-firing speakers. Regardless, they can be made to really go in the exact same places as your front and rear home theater loudspeakers (the back surround loudspeakers, in case you have them), or within three feet of these loudspeakers.

Only like their counterparts that were in- ceiling, it is suggested to use two pair. They need to be set or incorporated with your primary left and right loudspeakers in the very front of the room nearest your TV display, if the sole alternative is one pair.

Dipole and terminal speakers

Dipole/bipole surround loudspeakers, which are equipped with a switch for choosing between distinct styles of functioning is offered by some makers. These surround loudspeakers are ideal for pictures, since they generate a diffuse sound that does not call too much attention to itself. [Store dipole/bipole loudspeakers.]

Subwoofer

Since low bass frequencies are not directional, you can generally set your subwoofer just about any place in your home theater room with great results.

The majority of folks put their subwoofer in the room’s very front, in order that it is more easy to join to their home theater receiver. Placing your subwoofer near a wall will usually result in more bass, and positioning near a corner where three room boundaries come will get you even more. Remember that although the bass raises as you put the sub near a wall or corner, the quality of bass might be somewhat “boomier” and less controlled. Aim for a place in which you get a compromise between volume and quality of bass.

If you are not quite getting the bass you had hoped for, see if your subwoofer has a 2position switch called a phase control. Pick the setting that makes the bass while all your speakers are playing. Take a look at our post on tuning your subwoofer for more advice on how to get great bass in which you want your sub as soon as you have got it.

One trendy technique for setting your subwoofer is play some music to set your sub in your listening area, move across the room, and listen. You will likely see that the bass sounds only a little bit different as you move from place to place within the room where it sounds the greatest may be where you would like to place your subwoofer.

Strategies for odd-shaped rooms

L shaped rooms are tough because a lot of the sound is pulled into the empty space outside your listening area. It is not doing anyone any good there, so this positioning is made to direct the sound away from that empty space as much as possible

1, Begin by putting your TV where both axes of the “L” meet, instead of at one end of the “L.”

2, Order the front and center speakers around your TV as described in “The fundamentals. Attempt angling the left and right loudspeakers in somewhat toward your listening location.

3, Put your surround speakers in the corners if there is not an excellent place on either side, or to the sides of where you are seated.

4, Put your subwoofer along the wall about midway between your seating as well as your TV. For better audio, ensure it is not touching the wall, but sitting four to six inches away from it.

 

Television in a corner

Occasionally, you are left by the combination of doors, windows, builtin bookshelves, and fireplace without any place for your TV except a corner. It may seem hard to get good home theater sound with this setup, but all is not lost.

1, Set up your front soundstage in the typical way.

2, Put one surround on the rear wall and another one on the side wall.

3, Position the subwoofer in the corner several inches away from the wall.

Using The open Floor Plan

As with a room where your Television is positioned in a corner, the greatest challenge you’ll face with an open floor plan is where to put your environment speakers.

1, Set up your front soundstage in the topical way.

2, Contemplate using ceiling mount speakers for your surrounds. Take a look at models with pivoting drivers or angled baffles. These will allow you to aim the sound in the direction that gives the greatest surround effects.

3, Again, the sub may be placed in the corner, but experiment to learn what seems best in your room.

Lesson for In-Wall and In-Ceiling Loudspeakers

In wall and in ceiling loudspeakers could be an excellent way to spare space, but you will not be able to follow all the same positioning guidelines. Take a look at the illustrations below to get an idea of where to install these loudspeakers. For additional information, take a look at our articles on in-wall and in-ceiling loudspeaker positioning and installing in-wall and in-ceiling loudspeakers.

 


 

 

 

 

 

 

 

 

 

 

 

Leave a Comment

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>